Live Support

Buy MJX Hyper Go M25250 Original Upper Suspension Arm Hinge Pins for 14207 and 14208 1/14 scale RC cars. Replacement suspension pivot pins for repairing bent, worn, broken or missing upper suspension mounting hardware. Available in India.
Low stock. Secure yours before the next restock.
YouCliQ Club
Reward points with this order
Your payment is processed securely through trusted payment gateways.
The MJX Hyper Go M25250 Upper Suspension Arm Hinge Pins are original-style replacement suspension mounting components designed for the MJX Hyper Go 14207 and 14208 1/14 Scale RC Cars. These hinge pins play an important role in securing the upper suspension arms to their mounting points while allowing controlled suspension movement.
Upper suspension arm hinge pins act as pivot shafts within the suspension assembly. They help keep the upper control arms correctly positioned and allow them to rotate as the wheels move over bumps, jumps, and uneven driving surfaces.
Designed to match the original suspension mounting configuration, the MJX M25250 Upper Suspension Arm Hinge Pins are ideal for replacing bent, worn, damaged, or missing original hinge pins.
During high-speed driving, off-road racing, jumps, and hard landings, suspension mounting components experience repeated impacts and mechanical stress. Damaged hinge pins can cause excessive suspension play, restricted arm movement, incorrect wheel alignment, or unusual handling.
Whether you’re repairing collision damage, replacing worn suspension hardware, or performing routine RC maintenance, the MJX Hyper Go M25250 Replacement Upper Suspension Arm Hinge Pins help restore the intended suspension mounting arrangement of your RC vehicle.
Factory-style replacement upper suspension arm hinge pins designed for compatible MJX Hyper Go RC cars.
Identified by the MJX M25250 spare part number for accurate identification and compatibility checking.
Designed to secure compatible upper suspension arms to their mounting points.
Suitable for the MJX Hyper Go 14207 and 14208 1/14 scale RC vehicles.
Allows the upper suspension arms to pivot during suspension compression and extension.
Helps keep the upper control arms correctly positioned within the suspension assembly.
Designed to replace the corresponding original hinge pins without requiring custom modifications.
Suitable for replacing bent, worn, damaged, or missing upper suspension arm hinge pins.
A practical replacement component for maintaining the suspension mounting system of compatible MJX Hyper Go RC cars.
| Specification | Details |
|---|---|
| Brand | MJX Hyper Go |
| Part Number | M25250 |
| Product Type | Upper Suspension Arm Hinge Pins |
| Alternative Name | Upper Suspension Pivot Pins / Upper Control Arm Pins |
| Compatible Model 1 | MJX Hyper Go 14207 |
| Compatible Model 2 | MJX Hyper Go 14208 |
| Vehicle Scale | 1/14 |
| Installation Position | Upper Suspension Arm Mounting Points |
| Application | Suspension Arm Mounting and Repair |
| Function | Suspension Arm Retention and Pivot Movement |
| Version | Original-Style Replacement |
| Package Type | Suspension Hinge Pin Set |
The MJX Hyper Go M25250 Upper Suspension Arm Hinge Pins are designed for:
Compatibility with other MJX Hyper Go models has not been confirmed.
Before purchasing, compare the original hinge pin dimensions, mounting arrangement, and part number to ensure correct fitment.
Upper suspension arm hinge pins are essential mounting components within an RC vehicle’s suspension system.
They pass through compatible suspension arm mounting points and act as pivot shafts, allowing the upper suspension arms to move while remaining connected to the chassis or suspension mounting structure.
Their primary functions include:
A bent or damaged hinge pin can prevent the suspension arm from moving freely or cause excessive looseness around the mounting points.
The upper suspension arm hinge pins may require replacement if you notice:
These symptoms may also result from damaged suspension arms, worn mounting holes, or other suspension components.
Inspect the complete suspension assembly before replacing individual parts.
Replacing worn or damaged upper suspension arm hinge pins can help:
Using replacement hinge pins designed for your specific RC model helps maintain the intended suspension mounting dimensions and pivot arrangement.
Incorrectly sized hinge pins can cause suspension binding, excessive movement, improper fitment, or difficulty securing the suspension arms.
The MJX Hyper Go M25250 Upper Suspension Arm Hinge Pins are intended for the 14207 and 14208 models, making them suitable replacements for the corresponding original upper suspension mounting pins.
For a complete suspension repair, inspect related components, including:
These components are separate replacement parts unless specifically included in the product package.
Please refer to the product images or packaging for the exact number of hinge pins and any included retaining hardware.
Before replacing the upper suspension arm hinge pins, switch off your RC vehicle and disconnect the battery.
Remove the wheels or nearby components if necessary to access the upper suspension arm mounting points.
Carefully remove the damaged hinge pins using suitable RC maintenance tools.
Inspect the upper suspension arms, mounting brackets, and pivot holes for wear or damage.
Align the replacement M25250 Upper Suspension Arm Hinge Pins with the correct suspension mounting points.
Insert the hinge pins carefully without forcing them through misaligned mounting holes.
Secure the pins using the appropriate original retaining hardware.
After installation, check that the suspension arms pivot freely without excessive looseness or binding.
Inspect the suspension movement and wheel alignment before driving.
Perform a low-speed test to confirm proper suspension operation.
Please verify your RC vehicle’s model number 14207 or 14208 and original part number M25250 before placing an order.
This product is an upper suspension arm hinge pin replacement set, not a complete suspension arm assembly.
The exact material, pin diameter, length, number of individual pins, and included retaining hardware should be confirmed against the product images or manufacturer specifications.
Upper suspension arms, lower suspension arms, shock absorbers, mounting brackets, and other suspension components are not included unless specifically shown in the product images.
Compatibility with models other than the MJX Hyper Go 14207 and 14208 has not been confirmed.

MJX Hyper Go 14207 and 14208 M25250 Original Upper Suspension Arm Hinge Pins
₹999
Be the first to review this product.