Live Support

Buy MJX Hyper Go M30430 Original Lower Suspension Arm Hinge Pins for 14207 and 14208 1/14 scale RC cars. Replacement lower suspension pivot pins for repairing bent, worn, damaged or missing suspension mounting hardware. Available in India.
Low stock. Secure yours before the next restock.
YouCliQ Club
Reward points with this order
Your payment is processed securely through trusted payment gateways.
The MJX Hyper Go M30430 Lower Suspension Arm Hinge Pins are original-style replacement suspension mounting components designed for the MJX Hyper Go 14207 and 14208 1/14 Scale RC Cars. These hinge pins are essential for securing the lower suspension arms to their mounting points while allowing smooth and controlled suspension movement.
Lower suspension arm hinge pins act as pivot shafts within the RC vehicle’s suspension system. They connect the lower control arms to the chassis or suspension mounting brackets, allowing the arms to rotate as the wheels move over bumps, jumps, and uneven terrain.
Designed to match the original suspension mounting configuration, the MJX M30430 Lower Suspension Arm Hinge Pins are ideal for replacing bent, worn, damaged, or missing original suspension pins.
During high-speed driving, off-road racing, collisions, and hard landings, suspension mounting hardware experiences repeated impacts and mechanical stress. Damaged hinge pins can cause excessive suspension play, restricted arm movement, incorrect wheel alignment, and unpredictable vehicle handling.
Whether you’re repairing collision damage, replacing worn suspension hardware, or performing regular maintenance, the MJX Hyper Go M30430 Replacement Lower Suspension Arm Hinge Pins help restore the intended suspension mounting arrangement of your RC vehicle.
Factory-style replacement lower suspension arm hinge pins designed for the MJX Hyper Go 14207 and 14208 RC cars.
Identified by the MJX M30430 spare part number for accurate identification and compatibility checking.
Designed to secure compatible lower suspension arms to their mounting points.
Suitable for the MJX Hyper Go 14207 and 14208 1/14 scale RC vehicles.
Provides a pivot axis that allows the lower suspension arms to move during suspension compression and extension.
Helps keep the lower control arms correctly positioned within the suspension assembly.
Designed to replace the corresponding original hinge pins without requiring custom modifications.
Suitable for replacing bent, worn, damaged, or missing lower suspension arm hinge pins.
A practical replacement component for maintaining the front or rear lower suspension mounting system wherever the M30430 part is specified.
| Specification | Details |
|---|---|
| Brand | MJX Hyper Go |
| Part Number | M30430 |
| Product Type | Lower Suspension Arm Hinge Pins |
| Alternative Name | Lower Suspension Pivot Pins / Lower Control Arm Pins |
| Compatible Model 1 | MJX Hyper Go 14207 |
| Compatible Model 2 | MJX Hyper Go 14208 |
| Vehicle Scale | 1/14 |
| Installation Position | Lower Suspension Arm Mounting Points |
| Application | Suspension Arm Mounting and Repair |
| Function | Suspension Arm Retention and Pivot Movement |
| Version | Original-Style Replacement |
| Package Type | Suspension Hinge Pin Set |
The MJX Hyper Go M30430 Lower Suspension Arm Hinge Pins are designed for:
Compatibility with other MJX Hyper Go models has not been confirmed.
Before purchasing, compare the original hinge pin dimensions, mounting arrangement, and part number to ensure correct fitment.
Lower suspension arm hinge pins are important mounting components within an RC vehicle’s independent suspension system.
They pass through compatible lower suspension arm mounting points and act as pivot shafts, allowing the lower control arms to move while remaining securely connected to the chassis or suspension mounting structure.
Their primary functions include:
A bent or damaged hinge pin can prevent the suspension arm from moving freely or cause excessive looseness around the mounting points.
The lower suspension arm hinge pins may require replacement if you notice:
These symptoms may also result from damaged lower suspension arms, worn mounting holes, or other suspension components.
Inspect the complete suspension assembly before replacing individual parts.
Replacing worn or damaged lower suspension arm hinge pins can help:
Using replacement hinge pins designed for your specific RC model helps maintain the intended suspension mounting dimensions and pivot arrangement.
Incorrectly sized hinge pins can cause suspension binding, excessive movement, improper fitment, or difficulty securing the suspension arms.
The MJX Hyper Go M30430 Lower Suspension Arm Hinge Pins are intended for the 14207 and 14208 models, making them suitable replacements for the corresponding original lower suspension mounting pins.
For a complete suspension repair, inspect related components, including:
These components are separate replacement parts unless specifically included in the product package.
Please refer to the product images or packaging for the exact number of hinge pins and any included retaining hardware.
Before replacing the lower suspension arm hinge pins, switch off your RC vehicle and disconnect the battery.
Remove the wheels or nearby components if necessary to access the lower suspension arm mounting points.
Carefully remove the damaged hinge pins using suitable RC maintenance tools.
Inspect the lower suspension arms, mounting brackets, and pivot holes for wear or damage.
Align the replacement M30430 Lower Suspension Arm Hinge Pins with the correct suspension mounting points.
Insert the hinge pins carefully without forcing them through misaligned mounting holes.
Secure the pins using the appropriate original retaining hardware.
After installation, check that the lower suspension arms pivot freely without excessive looseness or binding.
Inspect the suspension movement, wheel alignment, and mounting connections before driving.
Perform a low-speed test to confirm proper suspension operation.
Please verify your RC vehicle’s model number 14207 or 14208 and original part number M30430 before placing an order.
This product is a lower suspension arm hinge pin replacement set, not a complete suspension arm assembly.
The M30430 Lower Suspension Arm Hinge Pins and M25250 Upper Suspension Arm Hinge Pins are different replacement parts and should not be assumed interchangeable.
The exact material, pin diameter, length, number of individual pins, and included retaining hardware should be confirmed against the product images or manufacturer specifications.
Lower suspension arms, upper suspension arms, shock absorbers, mounting brackets, and other suspension components are not included unless specifically shown in the product images.
Compatibility with models other than the MJX Hyper Go 14207 and 14208 has not been confirmed.

MJX Hyper Go 14207 and 14208 M30430 Original Lower Suspension Arm Hinge Pins
₹999
Be the first to review this product.