Live Support

Buy MJX Hyper Go P14267 Original Rear Hub Carriers for 14207 and 14208 1/14 scale RC cars. Replacement rear wheel hub supports for repairing broken, cracked or damaged rear suspension components. Available in India.
Limited availability.
YouCliQ Club
Reward points with this order
Your payment is processed securely through trusted payment gateways.
The MJX Hyper Go P14267 Rear Hub Carriers are original-style replacement suspension components designed for the MJX Hyper Go 14207 and 14208 1/14 Scale RC Cars. These rear hub carriers are essential parts of the vehicle’s rear suspension system, helping support the rear wheel hub assemblies and maintain proper wheel positioning during driving.
The rear hub carriers connect the rear wheel assemblies to the suspension arms and related components, allowing the suspension system to operate while keeping the rear wheels correctly positioned.
Designed to match the original factory configuration, the MJX P14267 Rear Hub Carriers are ideal for replacing cracked, broken, worn, or damaged original rear hub supports.
During high-speed driving, sharp cornering, jumps, collisions, and off-road adventures, rear suspension components experience repeated impacts and mechanical stress. Damaged hub carriers can affect rear wheel alignment, suspension movement, drivetrain operation, and overall vehicle handling.
Whether you’re repairing your MJX Hyper Go after a collision, replacing worn suspension components, or performing routine maintenance, the MJX P14267 Replacement Rear Hub Carriers provide a practical solution for restoring the original rear suspension and wheel hub mounting arrangement.
Factory-style replacement rear hub carriers designed for the MJX Hyper Go 14207 and 14208 RC cars.
Identified by the MJX P14267 spare part number for accurate identification and compatibility checking.
Designed to support the rear wheel hub assemblies and maintain their connection to the rear suspension system.
Suitable for the MJX Hyper Go 14207 and 14208 1/14 scale RC vehicles.
Works with the rear suspension arms and related components to allow controlled wheel movement over uneven surfaces.
Helps maintain the intended rear wheel positioning and suspension geometry when correctly installed.
Designed to replace the corresponding original rear hub carriers without requiring custom modifications.
Suitable for replacing cracked, broken, worn, or damaged rear hub carriers caused by collisions, hard landings, and regular driving.
A practical replacement component for maintaining the rear suspension and wheel hub assemblies of compatible MJX Hyper Go RC cars.
| Specification | Details |
|---|---|
| Brand | MJX Hyper Go |
| Part Number | P14267 |
| Product Type | Rear Hub Carriers |
| Alternative Name | Rear Wheel Hub Supports / Rear Hub Mounts |
| Compatible Model 1 | MJX Hyper Go 14207 |
| Compatible Model 2 | MJX Hyper Go 14208 |
| Vehicle Scale | 1/14 |
| Installation Position | Rear Suspension / Rear Wheel Hub Assembly |
| Application | Rear Suspension and Wheel Hub Repair |
| Function | Rear Wheel Hub Support and Positioning |
| Version | Original-Style Replacement |
| Package Type | Rear Hub Carrier Set |
The MJX Hyper Go P14267 Rear Hub Carriers are designed for:
Compatibility with other MJX Hyper Go models has not been confirmed.
Before purchasing, compare the original rear hub carrier design, mounting points, and part number to ensure correct fitment.
Rear hub carriers are important components of an RC vehicle’s rear suspension and wheel mounting system.
They help support the rear wheel hub assemblies and provide mounting connections between the wheel hubs and suspension arms.
The rear hub carriers work together with the lower suspension arms, upper suspension linkages, wheel bearings, axle shafts, and other related components to maintain correct rear wheel positioning.
Their primary functions include:
A damaged rear hub carrier may cause excessive wheel movement, incorrect alignment, or restricted suspension operation.
The rear hub carriers may require replacement if you notice:
These symptoms may also result from worn bearings, damaged axle shafts, suspension arms, upper linkages, or other components.
Inspect the complete rear wheel hub and suspension assembly before replacing individual parts.
Replacing worn or broken rear hub carriers can help:
Using replacement rear hub carriers designed for your specific RC model helps maintain the intended mounting dimensions and suspension configuration.
Incorrectly sized or incompatible hub carriers may affect rear wheel alignment, bearing fitment, axle positioning, suspension travel, and overall vehicle handling.
The MJX Hyper Go P14267 Rear Hub Carriers are intended for the 14207 and 14208 models, making them suitable replacements for the corresponding original rear hub support components.
For a complete rear suspension inspection, check the related components, including:
These components are separate replacement parts unless specifically included in the product package.
Please refer to the product images or packaging for the exact number of individual hub carriers and any included mounting hardware.
Before replacing the rear hub carriers, switch off your RC vehicle and disconnect the battery.
Remove the rear wheels to access the rear hub and suspension assemblies.
Carefully disconnect the damaged hub carriers from the suspension arms and related components.
Remove the axle and bearing components as required, taking care not to damage reusable parts.
Inspect the wheel bearings, axle shafts, lower suspension arms, upper suspension linkages, and mounting hardware for damage.
Install the replacement P14267 Rear Hub Carriers in the correct factory mounting positions.
Reinstall the compatible bearings, axle components, and suspension mounting hardware.
Ensure that the rear wheels rotate freely and that the suspension moves smoothly without binding.
After installation, check the rear wheel alignment, suspension movement, and drivetrain clearance.
Perform a low-speed test before returning to high-speed driving.
Please verify your RC vehicle’s model number 14207 or 14208 and original part number P14267 before placing an order.
This product is a rear hub carrier replacement set, not a complete rear suspension or wheel hub assembly.
The P14267 Rear Hub Carriers, P14257 Rear Lower Suspension Arms, and P14247 Rear Upper Suspension Arm Linkages are different components and are not interchangeable.
The exact material, number of individual carriers, and included mounting hardware should be confirmed against the product images or manufacturer specifications.
Wheel bearings, axle shafts, suspension arms, screws, and other components are not included unless specifically shown in the product images.
Compatibility with models other than the MJX Hyper Go 14207 and 14208 has not been confirmed.

MJX Hyper Go 14207 and 14208 P14267 Original Rear Hub Carriers – Part Replacement
₹999
Be the first to review this product.