Live Support

Buy MJX Hyper Go P14772 Original Steering Servo Horn Arm for compatible MJX RC cars. Replacement steering servo arm for repairing broken, stripped, loose or damaged steering linkage connections. Available in India.
Limited availability.
YouCliQ Club
Reward points with this order
Your payment is processed securely through trusted payment gateways.
The MJX Hyper Go P14772 Steering Servo Horn Arm is an original-style replacement steering component designed for compatible MJX Hyper Go 14207 and 14208 1/14 Scale RC Cars. This essential steering part connects the steering servo output shaft to the vehicle’s steering linkage, transferring servo movement to the front steering mechanism.
The steering servo horn plays an important role in controlling the direction of your RC vehicle. When the steering servo rotates in response to transmitter commands, the servo horn transfers that movement through the steering linkage, allowing the front wheels to turn left or right.
Designed to match the original steering configuration, the MJX P14772 Replacement Steering Servo Horn Arm is ideal for replacing a cracked, broken, stripped, worn, or damaged original servo arm.
During high-speed driving, collisions, hard landings, and off-road adventures, the steering system can experience sudden impacts and mechanical stress. A damaged servo horn may cause loose steering, inconsistent wheel movement, or a complete loss of steering response.
Whether you’re repairing collision damage, replacing a worn steering component, or performing routine maintenance, the MJX Hyper Go P14772 Steering Servo Horn Arm helps restore the intended steering linkage connection and steering operation.
Factory-style replacement steering servo horn arm designed for compatible MJX Hyper Go RC vehicles.
Identified by the MJX P14772 spare part number for accurate identification and compatibility checking.
Designed to attach to the compatible steering servo output shaft and transfer movement to the steering linkage.
Listed for the MJX Hyper Go 14207 and 14208 1/14 scale RC cars.
Transfers rotational movement from the steering servo to the steering linkage for left and right wheel control.
Helps maintain the intended connection and positioning between the steering servo and steering mechanism.
Designed to replace the corresponding original steering servo horn without requiring custom steering system modifications.
Suitable for replacing cracked, broken, stripped, loose, or damaged steering servo horn arms.
A practical replacement component for maintaining the steering system of compatible MJX Hyper Go RC cars.
| Specification | Details |
|---|---|
| Brand | MJX Hyper Go |
| Part Number | P14772 |
| Product Type | Steering Servo Horn Arm |
| Alternative Name | Steering Servo Arm / Servo Horn / Steering Linkage Arm |
| Compatible Model 1 | MJX Hyper Go 14207 |
| Compatible Model 2 | MJX Hyper Go 14208 – Verification Recommended |
| Additional Model Mentioned | MJX 14028 – Verification Recommended |
| Vehicle Scale | 1/14 for MJX 14207 / 14208 |
| Installation Position | Steering Servo Output Shaft |
| Application | Steering Linkage Connection and Repair |
| Function | Transfers Servo Rotation to Steering Linkage |
| Version | Original-Style Replacement |
| Package Type | Steering Servo Horn Arm |
The MJX Hyper Go P14772 Steering Servo Horn Arm is listed for:
The supplied product description additionally mentions:
Compatibility clarification: The product title specifies MJX 14207 and 14208, while the accompanying description specifies MJX 14207 and 14028. Please verify whether the second model is 14208 or 14028 before publishing the compatibility list.
Before purchasing, compare the original servo horn design, output shaft connection, mounting arrangement, and part number to ensure correct fitment.
The steering servo horn is an important mechanical component in an RC vehicle’s steering system.
It attaches to the output shaft of the steering servo and transfers the servo’s rotational movement to the steering linkage.
When the driver turns the steering wheel on the transmitter, the receiver sends a signal to the steering servo. The servo rotates its output shaft, causing the attached servo horn to move.
This movement is transferred through the steering linkage to control the direction of the front wheels.
Its primary functions include:
A damaged or stripped servo horn may prevent the servo from transferring movement correctly, even when the steering servo itself is functioning normally.
The steering servo horn arm may require replacement if you notice:
These symptoms may also result from damaged steering linkages, a worn servo output shaft, a loose retaining screw, or a faulty steering servo.
Inspect the complete steering assembly before replacing individual components.
Replacing a worn or broken steering servo horn can help:
Using a replacement servo horn designed for your RC vehicle helps maintain the intended steering linkage arrangement and mounting compatibility.
Incorrectly sized or incompatible servo horns may not fit the servo output shaft correctly. They may also affect steering travel, linkage alignment, or the operation of the steering mechanism.
The MJX Hyper Go P14772 Steering Servo Horn Arm is intended to replace the corresponding original steering arm on compatible MJX models.
It is a practical spare part for RC owners who want to repair the steering system without replacing the complete servo assembly.
For a complete steering repair, inspect related components such as:
These parts are sold separately unless specifically included in the product package.
Please refer to the product images or packaging for the exact number of components and any included mounting screws or accessories.
Before replacing the steering servo horn, switch off your RC vehicle and disconnect the battery.
Remove the body shell to access the steering servo and linkage assembly.
Carefully disconnect the damaged servo horn from the steering linkage.
Remove the servo horn retaining screw and gently detach the original arm from the servo output shaft.
Inspect the servo output shaft, steering linkage, and mounting hardware for damage.
Before installing the replacement horn, power on the transmitter and vehicle to allow the steering servo to return to its neutral position.
Position the front wheels straight ahead and install the replacement P14772 Steering Servo Horn Arm in the correct orientation.
Secure the servo horn using the appropriate mounting hardware without overtightening.
Reconnect the steering linkage and check that all components move freely.
Verify that the front wheels turn smoothly in both directions without binding.
Adjust the steering trim and endpoints if necessary.
Perform a low-speed steering test before returning to normal driving.
Important: Never force an incompatible servo horn onto the servo output shaft, as this may damage the servo splines or internal gearing.
Please verify your RC vehicle’s model number and original part number P14772 before placing an order.
This product is a replacement steering servo horn arm, not a complete steering servo or steering linkage assembly.
The exact material, servo spline specification, dimensions, mounting hole arrangement, and included hardware should be confirmed against the manufacturer specifications or product images.
The servo horn must match the output shaft configuration of the installed steering servo.
The steering servo, servo saver, linkage rods, mounting screws, and other steering components are not included unless specifically shown in the product images.
Compatibility verification required: The product title lists MJX 14207 and 14208, but the supplied description lists MJX 14207 and 14028. Confirm the correct model combination before publishing.

MJX Hyper Go P14772 Original Steering Servo Horn Arm for 14207 and14208
₹550
Be the first to review this product.