Live Support

Buy MJX Hyper Go S0690 Original 6KG Full-Size Steering Servo for MJX 14207, 14028, 12212, 10303 and 10304 RC cars. Replacement steering servo for repairing faulty, damaged or unresponsive steering systems. Available in India.
Low stock. Secure yours before the next restock.
YouCliQ Club
Reward points with this order
Your payment is processed securely through trusted payment gateways.
The MJX Hyper Go S0690 6KG Steering Servo is an original-style replacement steering component designed for compatible MJX Hyper Go RC cars, including the MJX 14207, 14028, 12212, 10303, and 10304 models.
This full-size steering servo is responsible for converting electronic steering signals from the RC receiver into mechanical movement, allowing the front wheels to turn left and right according to the driver’s steering input.
Featuring a 6KG manufacturer-rated steering torque, the MJX S0690 servo is designed to provide the steering force required by its compatible RC vehicles. It works with the vehicle’s steering linkage and servo saver assembly to control front wheel direction during driving.
Whether your original steering servo has stopped responding, developed excessive internal gear play, or suffered damage during off-road driving, the MJX S0690 Replacement Steering Servo offers a practical solution for restoring the original steering system.
Ideal for routine maintenance, repairs, and replacement of damaged steering electronics, this servo helps keep your compatible MJX RC car operating as intended.
Factory-style replacement steering servo designed for compatible MJX Hyper Go RC vehicles.
Identified by the MJX S0690 spare part number for accurate identification and compatibility checking.
Features a manufacturer-specified 6KG steering torque class, intended to provide suitable steering force for supported MJX RC models.
Designed as a full-size replacement steering servo for compatible MJX RC car steering assemblies.
Listed for the MJX 14207, 14028, 12212, 10303, and 10304 RC vehicles.
Converts receiver steering signals into mechanical movement to control the direction of the front wheels.
Intended to replace the corresponding original steering servo without custom steering system modifications when the model uses the S0690 configuration.
Suitable for replacing a faulty, damaged, unresponsive, or worn original steering servo.
A useful replacement component for maintaining the steering system of compatible MJX Hyper Go RC cars.
| Specification | Details |
|---|---|
| Brand | MJX Hyper Go |
| Part Number | S0690 |
| Product Type | RC Steering Servo |
| Servo Configuration | Full-Size |
| Rated Steering Torque | 6KG Class |
| Compatible Model 1 | MJX 14207 |
| Compatible Model 2 | MJX 14028 |
| Compatible Model 3 | MJX 12212 |
| Compatible Model 4 | MJX 10303 |
| Compatible Model 5 | MJX 10304 |
| Installation Position | Steering Servo Mount |
| Application | RC Car Steering Control |
| Function | Electronic-to-Mechanical Steering Movement |
| Version | Original-Style Replacement |
| Package Type | Steering Servo |
Operating voltage, gear material, servo dimensions, connector type, speed, and torque measurement conditions have not been independently confirmed.
The MJX Hyper Go S0690 6KG Steering Servo is listed as compatible with:
Before purchasing, verify that your RC vehicle uses the S0690 steering servo.
Some RC models may have different electronic configurations or servo mounting arrangements depending on the production version.
For accurate fitment, compare the original servo part number, connector, mounting dimensions, and steering output arrangement.
A steering servo is an essential electronic component in a radio-controlled vehicle.
When the driver turns the steering wheel on the transmitter, the receiver sends a steering control signal to the servo.
The servo motor and internal gear mechanism convert that electronic command into rotational movement at the servo output shaft.
This movement is transferred through the servo horn, servo saver, and steering linkages to turn the front wheels.
The steering servo performs several important functions:
A properly functioning steering servo is essential for accurate directional control of your RC vehicle.
The 6KG rating refers to the servo’s nominal torque class, commonly expressed as approximately 6 kg·cm in RC servo specifications.
Servo torque describes the rotational force available at the output shaft.
A higher torque rating generally indicates that a servo can apply greater turning force under its specified operating conditions.
However, actual servo performance depends on several factors, including:
The exact operating voltage and test conditions for the S0690’s advertised 6KG rating should be checked against the manufacturer’s specifications.
The MJX S0690 steering servo may require replacement if you experience:
These symptoms can also result from receiver problems, damaged wiring, low battery voltage, incorrect transmitter settings, or binding steering linkages.
Inspect the complete steering system before replacing the servo.
Replacing a damaged or malfunctioning steering servo can help:
Choosing a replacement servo designed for your RC vehicle helps maintain compatibility with the intended steering system.
Using an incorrectly sized or incompatible servo may cause installation problems, steering linkage misalignment, connector incompatibility, or electrical issues.
The MJX Hyper Go S0690 6KG Steering Servo is listed for several MJX models, making it a suitable replacement option for vehicles originally equipped with this servo.
It is particularly useful for RC owners who want to restore the original steering setup rather than modify the vehicle with an aftermarket servo.
Please refer to the product images for confirmation of the included servo horn, mounting screws, and accessories. These items should not be assumed included unless shown.
Before replacing the steering servo, switch off your RC vehicle and disconnect the battery.
Remove the body shell and any components necessary to access the steering servo.
Carefully disconnect the original servo connector from the receiver or electronic control unit.
Remove the servo horn or servo saver connection and unscrew the damaged steering servo from its mounting position.
Inspect the steering linkages, servo saver, and mounting hardware for damage or binding.
Install the replacement MJX S0690 Steering Servo in the correct mounting position.
Connect the servo using the correct connector orientation and ensure that the vehicle’s electronics are compatible.
Before securing the servo horn, power on the transmitter and vehicle to allow the servo to move to its neutral position.
With the wheels positioned straight ahead, reinstall the compatible servo horn or servo saver.
Check that the steering moves freely in both directions without mechanical binding.
Adjust the steering trim and endpoints if supported by the transmitter.
Perform a low-speed steering test before returning to normal driving.
Important: Do not force the servo output shaft or operate the steering mechanism against a mechanical stop, as this may damage the servo gears or motor.
Please verify your RC vehicle’s model number and original servo part number S0690 before placing an order.
This product is a 6KG full-size replacement steering servo, not a complete steering assembly.
The advertised 6KG rating should not be interpreted as a verified torque measurement at every operating voltage.
The exact gear material, motor type, operating voltage, servo speed, connector configuration, spline specification, and dimensions should be confirmed against the manufacturer’s product information.
The servo may require steering centering and adjustment after installation.
The RC vehicle, receiver, transmitter, steering linkages, servo saver, and mounting accessories are not included unless specifically shown in the product images.
Compatibility with models other than the MJX 14207, 14028, 12212, 10303, and 10304 has not been confirmed.

MJX Hyper Go S0690 Original 6KG Steering Servo for 14207 / 14028 / 12212 / 10303 / 10304
₹2590
Be the first to review this product.